Continued 1 | 2 | 3 | 4

Miscellaneous Items - Page 1 of 4

Item Number	Description	Rating	Manufacturer	Details
MW0374			FLOTRONICS	S/N 91-6121-101, STAINLESS STEEL, SIZE 12", SPEED REDUCER BY RELIANCE; SIZE 56TM16A, INPUT RPM 1750, INPUT HP 2.65, RATIO 38.5, S.F. 1.00
409-7311A	48" GLASTEEL COLUMN		PFAUDLER	THIS IS A SECTION OF THE COLUMN
249-1WTK00A	ACID FEED SKID		WESTINGHOUSE	APPROXIMATELY 10 METERING PUMPS ON SKID WITH CONTROLS. TWO ACID STORAGE TANKS SOLD.
442-7678	ADSORBER		BROWN FINTUBE CO	S/N G-1609-76-1, NB #27678, BUILT IN 1977, SHELL 150 PSI @ 500 F, HYDRO TEST 225 PSI, ASME CODED, NO DRAWINGS
329-3379	AGITATOR	5 HP	PHILADELPHIA	BELT DRIVEN RIGHT ANGLE AGITATOR PHILADELPHIA MODEL HVS-5. STAINLESS STEEL SHAFT 22" LONG, 10" FLANGE MOUNT.
246-JC101	AGITATOR	30 HP	LIGHTNIN	MODEL LAR 110-AL (77Q25) WITH 30 HP WESTINGHOUSE FRAME 284T, 1180 RPM, 460 VOLT, TEFC DRIVE. 4"/3" CARBON STEEL SHAFT WITH BLADES AT TWO LEVELS; UPPER (4) 12" X 32", LOWER (4) 5" X 13". OVERALL SHAFT LENGTH IS 150", GEAR RATIO IS 20.2/1, 58 RPM OUTPUT SPEED. UNIT IS MOUNTED ON A STEEL PLATE. 2 sold on 2-15-02 by Ray see invoice # 2804
246-JC102	AGITATOR	25 HP	LIGHTNIN	MODEL LAR 100-L (77Q25) WITH 25 HP WESTINGHOUSE FRAME 284T, 1170 RPM, 460 VOLT, TEFC DRIVE. 4"/3" CARBON STEEL SHAFT WITH BLADES AT TWO LEVELS; UPPER (4) 12" X 32", LOWER (4) 5" X 32". OVERALL SHAFT LENGTH IS 150", GEAR RATIO IS 30.2/1, 58 RPM OUTPUT SPEED. UNIT IS MOUNTED ON A STEEL PLATE.
246-JC103	AGITATOR	30 HP	LIGHTNIN	MODEL LAR 110-AL (77Q25) WITH 30 HP WESTINGHOUSE FRAME 284T, 1180 RPM, 460 VOLT, TEFC DRIVE. 4"/3" CARBON STEEL SHAFT WITH BLADES AT TWO LEVELS; UPPER (4) 12" X 32", LOWER (4) 5" X 13". OVERALL SHAFT LENGTH IS 150", GEAR RATIO IS 20.2/1, 58 RPM OUTPUT SPEED. UNIT IS MOUNTED ON A STEEL PLATE. 2 sold on 2-15-02 by Ray see invoice # 2804
439A-507	AGITATOR	5	PROQUIP, INC.	MODEL #5TFS50, S/N 3023, RATIO 50=1, 36 RPM, HAS AN ATTACHABLE SHAFT, NO DRAWINGS OR FILES, MOTOR BY RELIANCE ELECTIC, 5 HP, 1750 RPM, 230/460 VOLTS, FRAME L 184T, S.F. 1.15
MW-5746	AGITATOR	25 HP	CHEMINEER	MODUFLUX TURBINE AGITATOR BY CHEMINEER, MAV-250-726, S/N 1-15746. UNIT IS VERTICAL FLANGE MOUNT (18") WITH A CUT OFF 3" DIAMETER STAINLESS STEEL SHAFT. GEAR BOX IS BELT DRIVEN WITH A TWO SPEED BALDOR MOTOR 1740/640 RPM, GEAR BOX RATIO IS 25.6/1, 68/25 RPM OUTPUT SPEEDS.
MW-3331	AGITATOR		CHEMINEER	SURPLUS CHEMINEER MIXER; MODEL: 6HTH-15; HP: 15; 1750 RPM IN; SN: 1-733331-3; EQUIP #: 06-40; IMP. RPM: 100/0; 24" MOUNTING FLANGE W/16 BOLT HOLES; STAINLESS AND WILL SUPPORT A 6" SHAFT.
329-3380	AGITATOR	5 HP	PHILADELPHIA	BELT DRIVEN RIGHT ANGLE AGITATOR PHILADELPHIA MODEL HVS-5. STAINLESS STEEL SHAFT 22" LONG, 10" FLANGE MOUNT.
329-3381	AGITATOR	5 HP	PHILADELPHIA	BELT DRIVEN RIGHT ANGLE AGITATOR PHILADELPHIA MODEL HVS-5. STAINLESS STEEL SHAFT 22" LONG, 10" FLANGE MOUNT.
MW-1166	AGITATOR	1.17 HP	LIGHTNIN	MODEL NO. XLQC-1008, S/N 84-190760-02. 2-1/2" CARBON STEEL SHAFT CONNECTION (NO SHAFT OR BLADES), 11" SQUARE MOUNTING FLANGE. DRIVER IS A RELIANCE TWO SPEED MOTOR 1140/950 RPM.
MW-0688	AGITATOR	23.2	PHILADELPHIA	17.5-1 RATIO; INPUT 1750 RPM; 118 OUTPUT RPM; SN: 841HH0687;
432-R4B	AGITATOR	50 HP	LIGHTNIN	HASTALLOY C ; MODEL: 87-5-50; SN: 76009670; RATIO 25.0; OUTPUT RPM: 70.7/35; WITH HAST. C AGITATOR; 5" X 15'; 52" BLADE SPAN; 5 BLADES: 9" X 2';
329-46T307A	AGITATOR			SURPLUS AGITATOR FOR 3000 GALLON REACTOR; 4.5" DIA. SHAFT X 13'-0"; MECHANICAL SEAL; 54" SPAN THREE BLADE AGITATOR; 100 RPM; PHILADELPHIA PTE-10 GEAR; 1750 INPUT RPM; 230/460 VOLT;
MW-114	AGITATOR			KYNAR LINED; " X 164" LENGTH; REDUCED TO 2" DIA. X 1-3/4"; THREE (3) BLADE WITH 45" SPAN.
MW-1248C	AGITATOR (AERATOR)			AERATOR AGITATOR; 4" X 4'; STAINLESS; DRIVEN BY LEESON MOTOR; TEFC; 5 HP; 2450 RPM; 230/460 VOLTS;
MW-1248B	AGITATOR (AERATOR)			AERATOR AGITATOR; 4" X 4'; STAINLESS; DRIVEN BY LEESON MOTOR; TEFC; 5 HP; 2450 RPM; 230/460 VOLTS;
MW-1248A	AGITATOR (AERATOR)			AERATOR AGITATOR; 4" X 4'; STAINLESS; DRIVEN BY LEESON MOTOR; TEFC; 5 HP; 2450 RPM; 230/460 VOLTS;
MW-112	AGITATOR (ALUM)		CHEMINEER	MODEL: VIN-30; SN: 1-94290-1; RPM: 1750; ALUMINUM SHAFT; W/3 BLADES ON A 7" SPAN; 1-1/2" DIA. X 44" LENGTH; DRIVEN BY 3 HP MOTOR; 1730 RPM; 230/460 VOLTS; 8 BOLT HOLES ON FLANGE.
MW-0329	AGITATOR (GLASS)		PFAUDLER	UNIT IS GLASS; 3-1/2" DIA. X 129"; THREE (3) BLADE AGITATOR. UNIT IS IN CRATE.
MW-0330	AGITATOR (GLASS)		PFAUDLER	GLASS LINED AGITATOR; THREE (3) BLADES; UNIT IS 5" DIA. X 165" LENGTH. STILL IN CRATE.
MW-2458	AGITATOR (NO MOTOR)		LIGHTNIN	LIGHTNIN MODEL NO. SE22-TESS-502, S/N 662458, 50 HP, 68 RPM OUTPUT, 25.6 RATIO.
171-42A131	AGITATOR (TOP ENTERING)	15 HP	PROCHEM	MODEL NO. 850FTV15. 20'-2" SHAFT LENGTH, ***5" SHAFT DIAMETER***, TWO-2 BLADE PROPS WITH 90" DIAMETER IMPELLERS, ALL 316L STAINLESS. DRIVE MOTOR IS 15 HP, 1780 RPM, GEAR RATIO IS 165/1. PROCHEM S/N 7783.
171-42A132	AGITATOR (TOP ENTERING)	15 HP	PROCHEM	MODEL NO. 850FTV15. 20'-2" SHAFT LENGTH, 5" SHAFT DIAMETER, TWO-2 BLADE PROPS WITH 90" DIAMETER IMPELLERS, ALL 316L STAINLESS. DRIVE MOTOR IS 15 HP, 1780 RPM, GEAR RATIO IS 165/1. PROCHEM S/N 7782.
289-D7841A	AGITATOR GEAR BOX	5 HP	LIGHTNIN	MODEL NO. 17QC5, 230/460 VOLT, 870 RPM INPUT, 25.92/1 RATIO. NO SHAFT WITH UNIT.
329-3360	AGITATOR GLASS LND	SHAFT ONLY	DEDIETRICH	THREE BLADE GLASS LINED AGITATOR SHAFT 3" DIAMETER X 8' LONG, WHITE GLASS.
329-3354	AGITATOR GLASS LND	SHAFT ONLY	DEDIETRICH	THREE BLADE GLASS LINED AGITATOR SHAFT 3-1/2" DIAMETER X 11'-3" LONG, WHITE GLASS.
329-3355	AGITATOR GLASS LND	SHAFT ONLY	DEDIETRICH	THREE BLADE GLASS LINED AGITATOR SHAFT 3-1/2" DIAMETER X 9'-6" LONG, WHITE GLASS.
329-3357	AGITATOR GLASS LND	SHAFT ONLY	DEDIETRICH	THREE BLADE GLASS LINED AGITATOR SHAFT 4" DIAMETER X 10' LONG, WHITE GLASS.
329-3352	AGITATOR GLASS LND	SHAFT ONLY	DEDIETRICH	THREE BLADE GLASS LINED AGITATOR SHAFT 3-1/2" DIAMETER X 11'-3" LONG, WHITE GLASS.
457-1001	AGITATOR, GLASS LINED		PHILADELPHIA MIXER	MODEL #PTE-12, 40 HP, FOR DEDIETRICH, SA-5000 GALLON REATOR, 48" SPAN TURBINE, 3 BLADE, 4 1/2" DIA. SHAFT, 199 3/8 " O.A.L., 174" GLASS PORTION
409-3108	AIR COMPRESSOR	25 HP	GARDNER DENVER	HORIZONTAL; 230 VOLTS; WITH 2' x 5' TANK UNDER SKID.
125-PC500	AIR COMPRESSOR	150	ATLAS COPCO	MODEL #ZT110, S/N AIF 041 201, BUILT IN 1997, CFM ESTIMATED, MDPS 125, MOTOR POWER 150HP, SCFM 750,
MW-2756	AIR DRYER		PAUL TRINITY MICRO.	DUAL DRYER SKID (2) TANKS 16" x 3' 6"; NB: 12756, SN: 25492; 150 PSI @ 450 F; .375 SHELL
MW-7903	AIR DRYER		PAUL TRINITY MICRO.	DUAL DRYER SKID (2) TANKS 16" x 3' 6"; NB: 7903, SN: 15628; 150 PSI @ 450 F; .219 SHELL
MW-8191	AIR DRYER	200 CFM	CM KEMP MFG.	MODEL: 3166; SN: I12271; 12 HR. DRYING CYCLE; 200 CFM @70PSI @ 100F SKIDDED WITH CONTROLS.
MW-2992	AIR GRAVITY CONVEYOR		KENNEDY VAN SAUN	6" BYE 10' SS
MW-1250	AUGER (SPIRAL)			SS, LENGTH 5'7", SHAFT DIAMETER 2", SPIRAL DIAMETER 9"
439-447	AUTO BOTTLE LABELER
463-3768	AUTOMATIC STRETCH MACHINE		LANTECH INC	MODEL # Q-1000, S/N QA 002169, MORE INFORMATION IN FILE
00-0130	AUTOMATIC WATER STRAINER	380 GPM	R.P.ADAMS INC.	UNUSED AUTOMATIC WATER STRAINER, TYPE VWS, SIZE 4, 150 PSIG AT 350 GPM, S/N 200130. PARTS IN CRATE ATTACHED TO PALLET.
148-G409	BAGGING MACHINE	375 LBS/MIN	HOWE RICHARDSON	UNIT RATE 7-1/2 FIFTY POUND BAGS MINUTE, COMPLETE WITH PREWEIGH SCALE AND HOPPER, SURGE BIN, BLOWER, VALVE TYPE BAG FILLING MACHINE, BAG DROP UNIT WITH ELBOW RELEASE, BAG FEEDER, AND BELT CONVEYOR. MANUFACTURED BY ST REGIS PAPER.
399-F201A	BASKET FILTER		PLENTY PROD. INC.	MAWP: 295 PSI @ 165F; SN: 615-1; MODEL: 10" 300# V135; ELEMENT P.N. 200M; SIMPLEX BASKET STRAINERS; APPROX: WT: 1648 LBS. ASME CODE; DRAWINGS AND CODE PAPERS ON FILE; MFG. 1991.
399-F202A	BASKET FILTER		PLENTY PROD. INC.	MAWP: 295 PSI @ 165F; SN: 615-1; MODEL: 10" 300# V135; ELEMENT P.N. 200M; SIMPLEX BASKET STRAINERS; APPROX: WT: 1648 LBS. ASME CODE; DRAWINGS AND CODE PAPERS ON FILE; MFG. 1991.
399-F202B	BASKET FILTER		PLENTY PROD. INC.	MAWP: 295 PSI @ 165F; SN: 615-1; MODEL: 10" 300# V135; ELEMENT P.N. 200M; SIMPLEX BASKET STRAINERS; APPROX: WT: 1648 LBS. ASME CODE; DRAWINGS AND CODE PAPERS ON FILE; MFG. 1991.
399-F201B	BASKET FILTER		PLENTY PROD. INC.	MAWP: 295 PSI @ 165F; SN: 615-1; MODEL: 10" 300# V135; ELEMENT P.N. 200M; SIMPLEX BASKET STRAINERS; APPROX: WT: 1648 LBS. ASME CODE; DRAWINGS AND CODE PAPERS ON FILE; MFG. 1991.
088-1625	BLENDER/VACUUM/304SS	5 CUBIC FEET	PATTERSON LUDLOW	DOUBLE CONE JACKETED BLENDER, S/N 71-1625. SHELL RATED FULL VACUUM AT 250 DEGREES, 304SS CLAD. JACKET RATED 15 PSIG. DRIVER IS 1.5 HP GEAR MOTOR, 1780/46 RPM, 38.4 RATIO. BUILT 1971.
204-0112	BLENDER-VEE	2 CUBIC FEET	PATTERSON KELLY	UNUSED 316 SS VEE BLENDER. 13-1/2" DIAMETER X 2', 6" DISCHARGE. BLENDER HOUSING ONLY, NO DRIVE OR BASE.
125-0917	BOILER	5160 PPH		ONE (1) SURPLUS SKIDDED 150 HP BOILER; RE-TUBED 3 YEARS AGO. COMPLETE WITH CONDENSATE DRUM; CONTROLS; OIL FIRED; FIRE TUBE BOILER.
439-427	BOTTLE CHECK WEIGHER		RAMSEY	AUTOCHECK 8000
439-423	BOTTLE CODER
MW-9542	BRIDGE CRANE	15 TONS	SHAW BOX	SHAW BOX MODEL NO. 1-509542-1, S/N LO572667. CAPACITY 30,000 LBS, SPEED 9 FPM. AIR MOTOR DRIVE, 50 PSIG AIR PRESSURE REQUIRED. CABLE DRUM IS APPROXIMATELY 12" DIAMETER X 6' LONG.
354-C1535	BUCKET ELEVATOR		SINCLAIR	3000 #/HR CONVEYING RAT; 90 FRP BELT SPEED; 18" WIDE FLEXIBLE SIDEWALL CORRUGATED RUBBER BELT; CONVEYOR LENGTH; FEED 37'-0" HORIZONTAL; LIFT 79'-03" VERTICAL; DISCHARGE 31'-0" HORIZONTAL. WT: 20,000 LBS.
111-9601	BUCKET ELEVATOR		ASEECO	BUCKET ELEVATOR WITH PLASTIC BUCKETS AND STAINLESS STEEL HOUSING. 26" WIDE X 14 FT LONG HORIZONTAL PORTION ONLY. BUCKETS ARE 10" WIDE X 6" DEEP.
327-10717	BUCKET ELEVATOR		MEYER MACHINE, CO.	SN 2027, MODEL NO. PO-052-15-S, RANK "A" 1PFT-010-050 BUCKET ELEVATOR ST1 10-714, SS, HORIZONTAL BOX LENGTH 32' 9" DIA. 22", VERTICAL TOP LENGTH 9', DIA. 22", MAIN SECTION LENGTH 20' 3" DIA. 22"; 15" BUCKETS.
125-6821	BUFFALO HAMMERMILL		BUFFALO	MODEL W16H, S/N63212B, 9"X15" INLET, MOTOR; S/N2059937, 3 PHASE, 20 HP, 1750 RPM, 230/460 VOLT, 256TFRAME, BELT DRIVEN, 18" ROTOR, SPEED 3000
267-290	CAGE MILL		GUNDLACH	ONE (1) SURPLUS CAGE MILL; SIZE: 40" 2 ROWS; WT: 9000 LBS; (2) 30 HP MOTORS PLUS FEEDER. TOP FEED 12"X14"
439-430	CASE CHECK WEIGHER		ICORE ACUREX
439-419	CASE ERECTOR		ABC PACKAGING
439-429	CASE PACKER
439-448	CASE PACKER
439-432	CASE PALLETIZER		VONGAL	MODEL # SPLX 4843LHSEPD, S/N 1616
439-431	CASE SEALER		WESTINGHOUSE
254-54306	CENTRIFUGE	26" BASKET	TOLHURST	STAINLESS STEEL CONSTRUCTION, PERFORATED BASKET, CENTER SLUNG, MODEL 1B8, TOP DISCHARGE. BASKET SPEED 1200/600 RPM, 120 LBS/FT3. DRIVER IS LOUIS ALLIS 2/1 HP MOTOR. TOLHURST S/N TZ-54306. DATA AND DRAWINGS ON FILE.
409-C101	CENTRIFUGE		TOLHURST	BASKET TYPE; 30" X 4'-4"; 316SS; MODEL: KETEMA MARK III; S/N MZ-56644, HYDRAULIC DRIVEN @ 1080 RPM; 71#/CU.FT; 0-1080 RPM; SIZE 48; WITH TANK #82909; 500 GAL; SS; MFG. BY PERRY PROD; 4' X 4'-3"; VERT; 4 LEGS; 50 PSI @ 600F;
439-270	CENTRIFUGE		KRAUS MAFFEI	MFG. BY KRAUS MAFFEI; 1981; 316SS; MODEL: HZ125SI-300-960; SN: 9397; HORIZONTAL PEELER CENTRIFUGE; BASKET SPEED: 1150 RPM; INSIDE DIA. 1250 MM; 100 HP MOTOR; 1780 RPM; FALK GEAR; VARI SPEED.
439-265	CENTRIFUGE		KRAUS MAFFEI	MFG. BY KRAUS MAFFEI; 1981; 316SS; MODEL: HZ125SI-300-960; SN: 9397; HORIZONTAL PEELER CENTRIFUGE; BASKET SPEED: 1150 RPM; INSIDE DIA. 1250 MM; 100 HP MOTOR; 1780 RPM; FALK GEAR; VARI SPEED. DRAWINGS ON FILE
330-22034	CENTRIFUGE	75 HP	WESTERN STATES	VERTICAL SCREEN BOWL CENTRIFUGE, VARIABLE SPEED, HYDRAULIC DRIVE, 48" DIAMETER X 30" DEEP BASKET, (316SS) STAINLESS STEEL CONSTRUCTION. 1150 MAX RPM, 80 LBS/FT3 MAX LOAD. WESTERN STATES S/N 198. DRAWING ON FILE. APPROXIMATE WEIGHT 10,400 LBS. WITHOUT MOTOR.
347-CT-2	CENTRIFUGE		SHARPLES	BASKET TYPE; 48" X 30"; BASKET CENTRIFUGE; MAX RPM: 1150; MFG. BY SHARPLES; MODEL: T1600 @ 1150 RPM.
MW-2643	CENTRIFUGE		DELAVAL	MODEL# 65-25, SN. 352643-1, DRIVEN BY 2 HP, 230/460 VOLTS, BASE, CONTROLS, SS INTERNALS
409-C701	CENTRIFUGE		KETEMA	KETEMA MARK III CENTRIFUGE; 48" X 2'-06"; MARK III; 316 SS; HYDRAULIC DRIVEN; 1200 RPM; 30 HP DRIVE; WT: 8000 LBS; SN: ZM-49539;
409-C202	CENTRIFUGE		TOLHURST	48" X 30" BOWL; HYDRAUALIC DRIVE; BOWL TYPE; WITH #82966 400 GALLON; VERTICAL; SS; ATMOS; FLAT TOP AND BOTTOM; 30 HP; 1080 RPM; SN: ZT-39702; BATCH MASTER; BTM DISCHARGE; CENTER SLUNG. 1967.
125-1031*	CENTRIFUGE (2)	48" X 100"	BROADBENT	HORIZONTALLY MOUNTED SCREEN BOWL DECANTER TYPE UNIT WITH 300 HP MOTOR DRIVE.** MOVED TO SOLD FILE PER RON l**
212-GS1601	CENTRIFUGE (SOLID BOWL)	36" X 96" 200 HP	BIRD	S/N LB2130, BOWL IS 36" DIAMETER X 96" LONG. CONTACT PARTS ARE STAINLESS STEEL (316 SS) . CONVEYOR IS 7" SINGLE LEAD. BOWL HAS 15 & 3 DEGREE BREACH. GEAR RATIO 82/1 MODEL SA70-30N9. DRIVER IS 200 HP GENERAL ELECTRIC, 4160 VOLT, 1785 RPM, 8288Z FRAME, XP MOTOR WITH PULLEY WHEEL (212-GS1601M). UNIT MOUNTED ON BASE WITH VIBRO INSULATORS. AVAILABLE SEPARATELY IS A REBUILT SPARE ROTATING ASSEMBLY (BOWL AND CONVEYOR) AND THREE SPARE GEAR BOXES. 316 SS
212-GS2601	CENTRIFUGE (SOLID BOWL)	36" X 96" 200 HP	BIRD	S/N LB2129, BOWL IS 36" DIAMETER X 96" LONG. CONTACT PARTS ARE STAINLESS STEEL. CONVEYOR IS 7" SINGLE LEAD. BOWL HAS 15 & 3 DEGREE BREACH. GEAR RATIO 82/1 MODEL SA70-30N9. DRIVER IS 200 HP GENERAL ELECTRIC, 4160 VOLT, 1785 RPM, 8288Z FRAME, XP MOTOR WITH PULLEY WHEEL (212-GS1601M). UNIT MOUNTED ON BASE WITH VIBRO INSULATORS. AVAILABLE SEPARATELY IS A REBUILT SPARE ROTATING ASSEMBLY (BOWL AND CONVEYOR) AND THREE SPARE GEAR BOXES.
222-0574	CENTRIFUGE LAB TYPE		EQUIPMENT ENG	HOLDERS FOR FOUR SAMPLES. DIMENSIONS ARE 25" X 30", CARBON STEEL CONSTRUCTION. 6200 RPM, FRAME #EE1168, JOB #N2782. UNIT BUILT 1984.
114-GC101	CENTRIFUGE SOLID BOWL	40 HP, 41-3/4" ID	MULATOR & ROBATEL	MODEL DCF-1060-GVR, (316 SS) STAINLESS STEEL CONSTRUCTION, VERTICAL BATCH AUTOMATIC DECANTER (SOLID BASKET) CENTRIFUGE, WITH FEED PIPE, SKIMMER, AND SCRAPPER ASSEMBLEY. TWO SPEED MOTOR 40/10 HP, 1685/840 RPM, V-BELT DRIVE. BOWL SPEED HIGH/LOW, 1500/750 RPM. DRAWINGS AND INFORMATION ON FILE.
329-49Z450	CHILLED WATER PACKAGE	1110 TONS	FES	MODEL 600, SKID MOUNTED. SKID CONTAINS COMPRESSOR, MOTOR, RECEIVER, COOLER, AND TWO 10 HP VIKING GEAR PUMPS. PRICE INCLUDES A SPARE COMPRESSOR WHICH IS EITHER UNUSED OR REBUILT.
125-7665	CHILLER	450 HP	YORK	1998, MODEL: YKFCFBH1-CSD; SN: M002010-98; REFRIGERANT IS 134A; ELECTRIC: 460/3/60; COMPRESSOR MODEL: YDHA-50NBD; GEAR: SFGM-019330
MW-4558	CHILLER	100 HP	YORK	MODEL NO. 3DD125, S/N V0144558. 155 LBS. FREON REFRIGERANT 22
120-B1	COMPRESSOR		CARRIER
449-H5010	CONDITIONING OVEN		EMERSON APPARATUS	MODEL 50021, S/N 5010, 32" WIDE, 31 1/2" HIGH, 66" LONG, FREE STANDING. MEETS ASTM D2494, TEMP. 15O C (105 DEG. C, ASTM D2494), 240 VOLTS, 5200 WATTS, BLOWER WITH MOTOR BY DAYTON, 174 HP, 1725 RPM, 115/230 VOLTS, FRAME F56, S. F. 1.0. AIR ELECTRICALLY HEATED BY LOW-WATT DENSITY HEATERS AND CIRCULATED WITH POWERFUL INTERNAL BLOWER. DRIES ENTIRE SAMPLE, INCLUDING AREAS NOT EXPOSED TO THE AIR.
449-H5050	CONDITIONING OVEN		EMERSON APPARATUS	MODEL 50021, S/N 5050, 32" WIDE, 31 1/2" HIGH, 66" LONG, FREE STANDING. MEETS ASTM D2494, TEMP. 15O C (105 DEG. C, ASTM D2494), 240 VOLTS, 5200 WATTS, BLOWER WITH MOTOR BY DAYTON, 174 HP, 1725 RPM, 115/230 VOLTS, FRAME F56, S. F. 1.0.
125-1012	CONTINUEOUS AUTO MIXER		OAKES MACHINE CORP	MODEL #14MB200A, S/N 1012, DRIVEN BY RELIANCE MOTOR WITH 200 HP, 1785 RPM, 460 VOLTS, 1.15 S.F., FRAME 47TY,
125-991	CONTINUOUS AUTO MIXER		OAKES MACHINE CORP.	MODEL # 14MB200A, S/N 991, DRIVEN BY A RELIANCE MOTOR WITH 15 HP, 1765 RPM, 460 VOLTS, S.F. 1.15, FRAME 254TC
111-1	CONTROL BOX
238-1833	CONVEYOR		FLO-TRONICS	BUILT IN 1984, MODEL FTBH-17-4012, ITEM 001-012, F.Y. 2103 S/O 6124, SN. D83-2103-12, TAG C-408 SYS. FC
238-1832	CONVEYOR		FLO-TRONICS	BUILT IN1984, MODEL FTBH-16-5511 VAC., F.T.2103 S/O 6124, ITEM 001-011, SN. D83-2103-11, TAG C-4060 SYS. SE,
MW-1232A	CONVEYOR - ROLLER	24" X 20'		CARBON STEEL CONSTRUCTION MOUNTED ON A 14" HIGH FRAME.
MW-1232B	CONVEYOR - ROLLER	24" X 7'-03"		CARBON STEEL CONSTRUCTION MOUNTED ON A 14" HIGH FRAME.
MW-1221	CONVEYOR - SCREW	5 HP	RANGER CONVEYOR	12" DIAMETER X 12'-0" LONG CARBON STEEL SCREW CONVEYOR COMPLETE WITH DRIVE MOTOR. MODEL #12HR412R. 2" DIAMETER SHAFT, CLOSED TOP.
MW-1173	CONVEYOR - SCREW	6" X 8 FT	UNKNOWN	SINGLE FLIGHT CONVEYOR WITH GEAR REDUCER, NO DRIVE MOTOR.
MW-1200	CONVEYOR - VIBRATING		KINERGY	STAINLESS STEEL TROUGH 6" WIDE X 10' LONG. MODEL NO. KDC-6-9D, S/N KDC-956.
329-48M1119	CONVEYOR (BELT)	12" x 18'	KAM FLEX	KANFLEX MODEL #704, S/N 96107, APPROX 3/4 HP GEAR MOTOR DRIVE. STAINLESS STEEL HOUSING.
329-48M001	CONVEYOR (BELT)	18" WIDE X 16' LONG		WET CAKE CONVEYOR WITH STAINLESS STEEL THOUGH AND RUBBER BELT. SEMI-CONTINUOUS, 100 LBS/MIN, 1 HP DRIVE.
439-8398	CONVEYOR (RIBBON)		THOMAS & MULLER CO.	CENTRIFUGE DISCHARGE CONVEYOR ; SS/304L, 14" DIAMETER X 14' LENGTH, RIBBON TYPE SCREW CONVEYOR, FINAL SPEED 40 RPM, MAX. TEMP. 100 C, MAX. PRESSURE 5" H2O, MAX RATE 600 lb/min, WEIGHT EMPTY 1280 lbs., FULL 1600 lbs.; MOTOR, 3 HP, 1750 RPM, 460 VAC, 3 PH, 60 HZ, HIGH EFFICIENCY DESIGN. NO CODES. DRAWINGS ON FILE.
329-48M003	CONVEYOR PADDLE TWIN SCREW	16" X 7'-6"		HORIZONTAL, 304 STAINLESS STEEL WITH TWO 9" DIAMETER SCREWS AND 2 HP DRIVE. 7" FLIGHTS, 39 CUBIC FEET PER HOUR.
327-70020	CONVEYOR SCREW	6" X 6 FT	PATTERSON	STAINLESS STEEL WITH DRIVE.
329-3361	CONVEYOR SCREW	4" X 7'
327-66752	CONVEYOR SCREW	28" X 20 FT	PATTERSON	UNIT CONTAINS (4) 6" DIA. X 20' LONG STAINLESS STEEL SCREWS. DRIVE UNIT INCLUDED
354-C1496	CONVEYORS		B.W. SINCLAIR	NIRO FLAT BELT; SLIDER PAN BELT CONVEYOR; 304 SS; 1'-06" X 17'-2"; DRIVEN BY 3 HP MOTOR @ 1750 RPM; 230/460 VOLTS; WT: 4,200 LBS;

Continued 1 | 2 | 3 | 4
Updated 6/17